The Robits 5.5 in. ID Turntable Assembly can add a new spin to your next robot project.

• Description
• What's in the Box?
• Specifications
• Documentation

• This assembly eliminates the difficulty of the past by providing a robust power transmission option with an assortment of easy to use mounting features. This system is designed to natively accept one of our Programmable Servos or NeveRest Gearmotors giving you plenty of flexibility on speed/torque options. Due to the input mounting locations, multiple motors or servos (up to 8!) can be added to increase the load this turntable can move. The turret gear when paired with the included input gear creates a 4 to 1 reduction. When used with one of our 5-turn servos, this gives over a full rotation of travel. The added gear reduction can also be a great way to create a higher ratio for arm joints. Finally, the large hole in the mounting plate is great for allowing components to pass through the center.

  **Note** The following components are NOT included with this kit.

  Servo Drive Components

  • 1 - Programmable Servo and
  • 1 - 5mm Hex to 375IN Hex Adapter (am-4957) or
  • 1 - 5mm Hex Servo Hub (am-5439)

  Motor Drive Components

  • 1 - NeveRest Hex Motor or
  • 1 - NeveRest Orbital Motor and
  • 1 - 6mm D to 375IN Hex Adapter (am-3444)

  Use the above components to add power transmission to the Turntable mechanism. There are examples of power transmission assemblies in the CAD Files found in the Documentation tab.

• Included Items:

  • 1 - 200T 20DP Turntable Gear (am-5038)
  • 1 - 50T 20DP 375 Hex Bore Gear (am-5020_50)
  • 1 - 145 mm ID 203.2 mm OD Turntable Bearing (am-5039)
  • 1 - Mounting Plate for 5.5 Inch Turntable (am-5040)
  • 1 - Robits Side Motor Mount (am-5012)
  • 4 - 10-32 x 750 FHCS (am-1170)
  • 4 - 10-32 x 1000 FHCS (am-1324)
  • 7 - 10-32 x 750 SHCS (am-1047)
  • 11 - 10-32 Nylock Nut (am-1063)
  • 3 - #10 Washers (am-1026)
  • 4 - M3-0.5 x 8mm Zinc, Thread Lock Nylon Patch Screw (am-1500)
  • 2 - 0.430 ID x 0.500 OD x 0.250 L Aluminum Spacers (am-1698)

  Kits after February 2025 contain (2) am-1698 [1/4 IN long] in lieu of (1) am-1699 [1/2 IN long]

• • Gear Ratio: 4:01
  • Length: 10 in.
  • Load Capacity: 65 lbs.
  • Mounting Pattern: #10 Holes on 0.5 in. Spacing
  • Thickness: 1.6 in.
  • Width: 10 in.