Safety First

The VENTUS has a foam protector with a particularly small packing volume (between 18 and 20 cm, size M) which covers all the lumbar vertebrae and protects the pilot from the moment they put it on. Despite its compressibility, the protector does not lose its impact-absorbing properties even after years of use. A protector made by the German firm SAS-TEC is additionally fitted in the upper back area. In the case of an impact, this distributes the pressure of hard objects, such as stones or objects in the storage compartment, over a larger area. This reduces the risk of severe back injuries.

Dependable deployment:

the VENTUS has an ergonomically optimized parachute container and we tested deployment in a multitude of directions. The EN standard for harnesses only stipulates that the release force for the parachute must be between 2 and 7 daN - testing deployment in different directions is not required. Additionally, this functionality was tested with significant forces on the G-Force Trainer. In an emergency the parachute may be deployed in any flying position and even with high g-forces, it will deploy reliably.

Clever details for more comfort. 

The storage compartment has space for a drinking bladder and a channel for the drinking tube on the shoulder straps. This means the pilot can easily stay hydrated even on long flights. The auto-lock zip ensures that the storage compartment cannot accidentally open in flight, even if it was not completely closed before launch. The radio pocket that is included as standard can be fixed to the shoulder strap in two positions. Additional zipped side-pockets offer space for a mobile phone, camera, first-aid kit, etc.

Intuitive operation

Well-thought-out components make this harness simple for beginners and will equally enthuse experienced pilots. The color-coding featured on the PRION and IBEX risers is replicated on the VENTUS. The main hang-points and buckles are green on the right side and red on the left side. Adjusting the seat angle, the shoulder straps and the chest strap is possible in flight - not just on the ground!

Enjoyment of flight

The hang-point height was optimized so that all sizes of the VENTUS are pleasant and stable to fly. Thanks to the honeycomb seat plate and the well-thought-out seat geometry, it responds very well to weight-shift and provides direct feedback even during dynamic maneuvers. Additionally, the protector made by the German firm SAS-TEC provides excellent back support. The soft backrest made from Air Mesh, in combination with the central ventilation strip, rounds off the seat comfort. With the VENTUS, long flights are relaxed and comfortable.