Give your classic Volkswagen’s interior a crisp, factory-fresh look with this Complete Black Steering Wheel Kit. Designed to replicate the iconic 1966 factory aesthetic, this 15 3/4" (400mm) diameter wheel is the ideal choice for "nothing to hide" restorations or custom builds looking for a clean, understated cabin feel.

This kit is a total restoration solution. It comes complete with a brilliant triple-chrome-plated half-moon horn ring and the classic black-and-chrome center horn button featuring the Wolfsburg-style crest. Precision-molded from high-impact resin with a high-strength steel core, this wheel provides the perfect balance of vintage style and modern durability.

Key Features:

• Timeless 1966 Design: Features the signature "Half-Moon" chrome horn ring and crest emblem.

• All-In-One Kit: Includes the black steering wheel, chrome horn ring, horn button, and all mounting hardware.

• Modern Material Science: Built with UV-resistant resin to prevent the cracking and "sticky" feel common in original 50-year-old plastic wheels.

• Original Dimensions: 15 3/4" (400mm) diameter preserves the factory steering ratio and leverage.

• Steel Core Construction: Reinforced internal frame for maximum structural integrity and safety.

Installation Guide: Step-by-Step

Note: Disconnect your battery before starting to avoid accidental horn blasts during the install.

1. Remove the Original: Pop off your existing horn button. Use a 27mm socket to remove the steering shaft nut and washer. Pull the old wheel straight off the splines.

2. Check the Cancel Cam: Ensure your turn signal cancellation cam is functional. Transfer the cam from your old wheel to the new EMPI unit using the provided screws.

3. Center the Wheel: Ensure your front tires are straight. Align the splines and slide the new wheel onto the column so the spokes are level.

4. Torque Down: Reinstall the washer and 27mm nut. Torque to approximately 36 ft-lbs.

5. Assemble the Horn Ring: Place the chrome half-moon ring over the center and secure it with the included hardware.

6. Connect & Click: Attach the horn wire to the terminal on the back of the horn button. Press the button into the center of the wheel until it is fully seated.

7. Testing: Reconnect the battery and confirm the horn and turn signals operate correctly.