20% OFF shipping at neumaticosmexico.com on orders over $79 + up to 10% OFF products

Ship to:

/ English / USD

New Arrival

Air Freeshipping Best Sellers Nihao Choice

Sourcing

Shipping Calculation

home > autool sdt208 smoke tester > autool sdt208 smoke tester

download picture

description

Report this seller or product

autool sdt208 smoke testerThe Autool SDT208 is a professional Smoke Tester designed for detecting leaks in various closed vehicle systems. The device uses smoke generation through combustion in an oxygen poor environment, producing fast and dense smoke from mineral test oil. The smoke machine features an integrated air compressor and supports an adjustable working pressure up to 35 psi in standard mode, with a specifically limited pressure under 10 psi for EVAP applications.

Shopping security

Each payment you make on thelockerguy is secured with strict SSL encryption and PCI DSS data protection protocols

product description

Why choose thelockerguy wholesale?

The Autool SDT208 is a professional Smoke Tester designed for detecting leaks in various closed vehicle systems. The device uses smoke generation through combustion in an oxygen-poor environment, producing fast and dense smoke from mineral test oil. The smoke machine features an integrated air compressor and supports an adjustable working pressure up to 35 psi in standard mode, with a specifically limited pressure under 10 psi for EVAP applications. The system is equipped with a direct power supply compatible with both 12V and 24V vehicle batteries. This leak detection is widely applicable for pressure testing and visual inspection of intake paths, turbo systems, exhaust systems, and fuel vapor return systems.

During the diagnostic procedure, the smoke injection starts as soon as the unit is connected to the circuit to be tested via a specific Adapter. The pressure control and airflow are precisely managed through the integrated flow meter with adjustment knob and the analog pressure gauge on the front panel. This allows a technician to directly read a pressure drop, indicating a fault, even before smoke flows through the system. For the final leak visualization, the machine fills the closed circuit with dense smoke, after which escaping vapor marks the exact location of cracks, faulty seals, or porous hoses. The separate switches for air and smoke production make practical operation safer: the system can first be tested with compressed air only to establish basic integrity, after which the smoke generator is activated for exact leak location.

ADVANTAGES

✔ Equipped with a built-in air compressor, eliminating the need for an external compressed air connection.

✔ Features a dual test mode (Standard and EVAP) for both high- and low-pressure systems.

✔ Widely applicable on heavy equipment thanks to support for both 12V and 24V power.

✔ Diagnosis without direct smoke supply is possible thanks to the separate air and smoke switches.

ATTENTION POINTS

✕ Always requires a direct connection to an external battery power supply, mains power connection is not possible.

✕ Proper draining and replacement of test oil requires periodic manual maintenance via the drain plug.

Applications and functionalities

The Autool SDT208 is designed to perform leak detection procedures on various air and fluid circuits in motor vehicles.

Leak detection in intake and exhaust systems: Locating hairline cracks, faulty gaskets, or loose hose clamps by pressurizing the system and filling it with smoke.
Crankcase ventilation system (PCV) check: Detecting vacuum leaks in the engine block and associated ventilation hoses to diagnose irregular idling or mixture problems.
Turbo system diagnostics: Pressure testing the high-pressure section of the intake path to identify boost leaks around the intercooler and turbo hoses via the standard high-pressure mode.

Special features and capabilities

This smoke tester is equipped with specific components that ensure control and safety during diagnostic tests.

Separate test modes (Standard & EVAP): The device is equipped with an EVAP mode with pressure protection (< 10 psi) to prevent damage to sensitive fuel vapor valves, and a standard mode up to 35 psi for systems operating under higher turbo pressure.
Independent control of air and smoke: Thanks to separate activation buttons for the internal pump and the heating resistor, the technician can first perform a 'dry' pressure test. If pressure loss is detected on the gauge, the smoke is then activated.
Analog measuring instruments with flow control: A continuously adjustable flow meter (up to 15 L/min) combined with an accurate pressure gauge allows the user to precisely adjust both the applied pressure and the volume flow to the component being tested, enabling detection of leaks as small as 0.5 mm.

Compatible vehicles and systems

This leak detector is suitable for testing a wide range of closed circuits and vehicle types in the professional workshop.

Vehicle categories: Passenger cars, light commercial vehicles, motorcycles, off-road vehicles, and heavy equipment equipped with 12V or 24V battery systems.
System type: EVAP systems, intake manifolds, exhaust paths, EGR valves, cooling systems, vacuum lines, and crankcase ventilation.
Diagnostic application: Detecting cracks in closed pressure and vacuum circuits, as well as checking the sealing of the interior and fuel tank.

💡

Good to know: Use only high-quality mineral oil. Ensure the fluid level is always between the MIN and MAX marks on the sight glass to prevent overheating of the element or insufficient smoke density.

Package Contents

1x Autool SDT208 Smoke Tester
1x Power cable with battery clamps
1x Smoke delivery hose
1x Universal inflatable Adapter (Airbag)
1x Standard conical Adapter
1x EVAP service port Adapter
1x Set of stepped rubber plugs
1x Solid rubber stopper
1x Valve core tool
1x Empty oil fill bottle (20 ml)
1x User manual

Technical specifications

Specification	Description
Product brand	Autool
Product model	SDT208
Power supply voltage	12V / 24V DC (Vehicle battery)
Output pressure (Standard Mode)	Up to 35 psi
Output pressure (EVAP Mode)	< 10 psi
Maximum airflow	< 15 L/min
Air supply	Built-in air compressor
Heating principle	Low-oxygen combustion
Pressure and flow indication	Analog pressure gauge and flow meter
Fluid level control	Visual via built-in sight glass
Device dimensions	280 x 210 x 180 mm
Total package weight	6.55 kg

autool sdt208 smoke tester

Name: autool sdt208 smoke tester
Brand: neumaticosmexico.com
SKU: 72844251657
Price: 190.06 USD
Availability: InStock
Rating: 4.3762 (371 reviews)