The MD110 Photometer range are the Bluetooth version of the MD100 Range of portable handheld instruments. Simple button layout and robust waterproof design make them easy to use and ideal for testing pool water. With a large backlit display they are also suitable for use in the Plant Room.

The units supply accurate, reproduceable results using high quality interference filters with long-life LEDs as a light source. Tests are conducted using Lovibond® tablet reagents which give long-term stability and a guaranteed minimum 5 or 10 year shelf life. Liquid reagents can also be used.

Test results are automatically stored with time and date for later review, and can also be downloaded sent to phone or tablet using the Bluetooth connection.

Test / Range

 Chlorine 0-6.0 mg/l

 Chlorine 0-10mg/l (Additional tablets required)

 pH Value 6.5-8.4

 Alkalinity Total 5-200 mg/l

 Calcium Hardness 0-500 mg/l

 Bromine 0.05-13 mg/l

 Cyanuric Acid 2-160 mg/l

Contents Include;

 Instrument in carrying case

 4 Micro batteries (AAA)

 3 Round vials (Glass) with lids

 Tablets reagents

 Crushing / Stirring Rod

 Guarantee sheet

 Certificate (COC)

 Instruction manual

If you wish to purchase further products for your kit, the replacement codes areas follows:

 Stock code Description Quantity

511050  DPD No 1 Free Chlorine Tablets Box of 100

511051  DPD No 1 Free Chlorine Tablets Box of 250

511080BT DPD No 3 Total Chlorine Tablets Box of 100

511081BT DPD No 3 Total Chlorine Tablets Box of 250

511770BT Phenol Red Photometer Tablets Box of 100

511771BT Phenol Red Photometer Tablets Box of 250

511370BT Cyanuric Acid Tablets Box of 100

511371BT Cyanuric Acid Tablets Box of 250

517761BT Calcio-H Tablets No 1/2 Boxes of 100

517762BT Calcio-H Tablets No 1/2 Boxes 0f 250

513210BT Alka-M-Photometer Box of 100

513211BT Alka-M-Photometer Box of 250

197629 Cylindrical Cells with Lid Pack of 5

380230 Cleaning Brush 1

364120-1 Single Plastic Stirring Rod 1

364120 Plastic Stirring Rod Pack of 10

Additional Features:

Scroll Memory (SM)

To avoid unnecessary scrolling for the required test method, the instrument memorises the last method used before switching off. When the instrument is switched on again, the last used test method is selected automatically.

Calibration certificate

Beside the "Certificate of Compliance" which is supplied with the MD 100 & MD110, calibration certificates are available at cost on request. Individually supplied per instrument and per method, The Calibration Certificate must be ordered on initial purchase of the instrument.

 Data transfer

 Bluetooth interface installed as a standard.

 Zero Setting (OTZ)

Certain instruments have a One Time Zero (OTZ) function, making it unnecessary to zero the instrument between each test. This allows multiple tests to be performed using the same blank/zero sample until a new parameter is selected.

N.I.S.T Traceability

The instrument has a factory calibration, which is related to international standards which are not N.I.S.T traceable. The instrument may be calibrated by the user in a "user calibration mode" with N.I.S.T traceable standards.

 (N.I.S.T. = National Institute of Standards and Technology)