2008-2014 Subaru WRX / STI / 2008-2011 Impreza Hatchback Tail Light with Custom Reverse Light And Turn Signal Cut Outs

While clear tail lights were a big change for this platform, some of us aren't huge fans of this look. One awesome way to change it up is with smoke tint. Hence why we developed this custom tail light tint overlay that leaves your reverse light and turn signal the way they are. We do recommend some experience when it comes to tinting lights of any kind but given that we have developed this product with some excess to make it a little easier on you, we are confident just about anyone can do it. No more ugly clear taillights! These pre-cut smoked vinyl tint overlays add a great style to your WRX and STI Hatchback stock taillights. Computer cut for precise fitment! These unique tint overlays have been pre-cut for easy DIY installation and are made with quality automotive grade vinyl. Unlike most ebay or amazon vendors, Premium Auto Styling vinyl overlays are designed and produced here in the USA in our own facility. We design and test fit all products to ensure fitment guaranteeing you the best results . Basically, if they don’t work on our cars, they’re not going to end up on yours. If you are looking for an inexpensive styling modification, or you just want to change up the factory look, it's a great idea to checkout this vinyl overlay.

INSTALL GUIDE:

TOOLS REQUIRED: ***PRO FELT SQUEEGEE, and HEAT GUN or Warm Sunny Day to Post Heat the product

WET INSTALL BASICS: Getting the vinyl installed on your ride is very easy and only requires minimal tools. What you'll need: lubrication spray solution, squeegee and a heat gun. You can make a lubrication spray solution at home by using a spy bottle filled with water and mixing it with 1 drop of dish soap or buy our PRE-MIX SOLUTION SOLD HERE, You'll also need an application squeegee. For Best results we recommend cleaning the surface that you'll be applying our overlays too, cleaning should consist of removal of any waxes, dirt and or debris. For the cleaning process a clay bar is highly recommended: CLEANING PREP SPRAY & CLAY BAR's SOLD HERE). Before you begin installation of any vinyl overlays please make sure you are working in the right conditions, you should never install vinyl in direct sunlight, never apply vinyl in temperatures that are neither too hot nor too cold. Our in-house expert installers say the optimum temperature for installing vinyl is between 65 and 72 degrees (F). Vinyl can be installed as low as 50 degrees (F), and up to 90 degrees (F).

FEATURES:

• Sold as a set ( Left & Right side )
• Long 5-7 year outdoor durability
• Adds a unique style
• Will NOT crack, chip, yellow or peel
• Removable when necessary. However, once removed, the film CANNOT be re-installed
• Adhesive backed for easy installation and removal
• Maintenance free & car wash safe
• Professional installation recommended

NOTE: Using a felt edge squeegee is highly recommended for this application. Available for purchase in our application tool section above.

PRODUCT COMPATIBILITY