Bestway Flowclear Swimming Pool Water Heater

Bestway Pool Heater is a simple and effective way to warm up water in your above ground pool, creating a comfortable and relaxing environment to swim, paddle or play in. The outdoor pool heater is ideal for use with Bestway pools measuring 15 ft or smaller however can be used with bigger pools to slightly less effect.

The electric pool heater has two hose outlets, one of which connects it to a filter pump and the other to your above ground pool. Clear, clean and pristine water is pumped into the above ground pool heater via the filter pump, where it’s then heated and pumped back into the pool. The swimming pool heating system is compatible with filter pumps and sand filters with a flow rate of 1000 gal/hr (3785 L) or less. The swimming pool heater, which has a 4 m power cord to plug it into an electrical outlet, comes with all the necessary hoses and attachments, ensuring a swift and simple set-up.

Depending on your pool size and your preferred temperature the pool heater can take anywhere between 12 hours to 3 days to warm the water. The swimming pool heater has the ability to increase water temperature by approximately 0.5 degrees Celsius to 1.5 degrees Celsius per hour. Once again, this varies from pool size to pool size. Please note that this pool heater does not include a thermostat to adjust the temperature setting.

If taking a dip in the water makes your toes turn blue, then the Bestway Pool Heater is an absolute essential. It’s one of many products designed to enhance your above ground pool experience in the Bestway Pool Accessories collection.

Features:

• Maximum heater output: 40℃ (104℉)
• Compatible with above ground pools with water capacities between 1,520-17,035 L (400-4,500 gal.)
• Compatible with filter pumps with flow rates up to 3,785 L (1,000 gals.)
• Pool heater with automatic temperature regulation, equipped with a temperature control panel and a tactile on/off button
• Water flow sensor for high-level protection
• The pool heater is supplied with a portable residual current device-rated residual operating
• Current not exceeding 10mA
• Contents: 1 pool heater
• Easy to set up and use thanks to its soft-touch digital control panel
• The heater connects to the pool filter via a 32 mm hose connection

Setup Instructions

• Connect hose from “A” to the pool heater
• Make sure the arrow on the heater is facing the filter pump. The hose will connect from the heater into the filter pump
• Connect hose from filter pump into “B”

Safety Instruction :

• Children to be supervised by an adult

Box Contains: Bestway Flowclear Swimming Pool Water Heater