Ralgro^® implants are designed for use with the Ralogun™ applicator.

(NOTE: The Ralogun™ applicator, which is designed for the Ralgro^® line of implants, is NOT compatible with Revalor^® implants.)

Before implanting

• Make sure the implanting site is clean and dry. If necessary, use a wire brush or scraper to remove mud, dirt and manure. Disinfect and scrape or dry before implanting.

How to use the Ralogun™ applicator

• Each chamber of the applicator contains a full dose of Ralgro^®.
   
• Insert the cartridge in the magazine of the Ralogun™ with the hole of the axle of the cartridge pointed toward the handle of the applicator.

• After snapping in place, rotate the cartridge clockwise to assure proper seating.

• Check the window at the top to ensure that the pellet chamber is aligned with the applicator plunger.

• Take the ear of the animal firmly with the free hand and insert the needle into the subcutaneous tissue at the implanting site. Squeeze the trigger to deliver a full dose of Ralgro^®.
  

• Keep the trigger depressed while withdrawing the needle, to be sure that the implant stays in place.

• Rotate the cartridge in the direction of the arrow on the gun until you see the new dose visible and centered in the window.

• Disinfect the needle with cotton or gauze moistened with disinfectant before the next implant.