The Graupner mz-18 remote control with 9 channels is the perfect transmitter for almost all model aircraft. The transmitter is particularly suitable for advanced RC pilots. The proven Graupner 2.4 GHz HoTT technology guarantees interference-free and delay-free transmission, even over long ranges. The Graupner mz-18 has a 3.5 TFT color touch display. Received telemetry data can be read off clearly and programming can be carried out directly on the transmitter. As an additional safety feature, the mz-18 has an intelligent voice output - via loudspeakers or headphones. This provides telemetry data, warnings, alarms and vario signals.

The mz-18 can store up to 30 models internally. If additional models or telemetry data are to be stored, the mz-18 has a micro SD card slot. The memory can therefore be easily expanded.

Features:

• HoTT (HOPPING TELEMETRY TRANSMISSION) bi-directional 2.4GHz technology
• 75 jump frequencies for safe transmission
• 9 channels
• 3.5" TFT colour touch display for easy operation
• Intelligent speech output of telemetry data, warnings, alarms and Vario signal via loudspeakers or headphones
• Real-time data transmission with optional sensors (Vario, GPS, fuel, temperature, voltage, current, speed and much more)
• Teacher/student system wireless or wired
• Binding of several receivers possible
• Ball bearing billet units (total 8 units)
• µSD card slot for model memory expansion and telemetry data recording
• 30 model memories
• Model copy function
• Updateable via USB
• Model type: helicopter, flight model (normal or delta), glider model
• Numerous servo settings (travel, limit, reverse, center position)
• DualRate and Expo, separately adjustable for each flight phase
• 6 flight phases
• Helicopter type: 1 servo, 2 servo 180°, 3 servo 120° (2 pitch or 2 roll), 3 servo 140°, 4 servo 90°
• Pitch curves (7 points) separately adjustable for each flight phase
• Gas curves (7 points) separately adjustable for each flight phase
• Phase trims for pitch and gas
• Swash plate limiter function
• Swash plate mixing function
• 5 Linear mixer
• 3 curve mixer
• Numerous model aircraft types from 1QR to 4-flap surfaces
• Elevator: 1 HR, 2HR, V-tail
• Snaproll function
• Aileron differentiation, separately adjustable for each flight phase
• Butterfly function

NEW:

Security:

• FHSS, frequency hopping over up to 75 channels
• Maximum noise immunity through optimized frequency hopping, wide channel spread and antenna diversification
• Intelligent data transmission with correction function
• Extremely high range
• Range test and warning function
• low-voltage warning
• Extremely wide receiver operating voltage range from 3.6 V to 8.4 V (functional up to 2.5 V)
• Numerous fail-safe functions
• Keylog function to prevent unintentional menu changes

Precision:

• Shorter response times adjustable (10ms period time)
• No additional delays due to module processors. All hopping management is done directly from the 32-bit main processor.
• Synchronous servo run possible by simultaneous control of the servo outputs in blocks of 4

Pilot feeling:

• Largely instantaneous control reactions through direct processing
• Telemetry evaluation in real time
• Wireless teacher/student function

More characteristics:

• Simple and extremely fast binding
• Free channel assignment (channel mapping), transmitter and receiver mixing functions and all servo settings can be easily programmed
• Binding of any number of receivers for channel expansion (max. 16 channels). The last bound receiver sends the telemetry data.
• Future-proof due to update capability via USB interface