2018-2022 HONDA ACCORD | TAIL LIGHT DECK - GLOSS BLACK

Tail Light Deck Vinyl Overlay: Premium Auto Styling overlays add great styling for a low price! The overlays are precision cut from a durable vinyl for a perfect fit and aggressive styling that’s sure to look good on any Accord! Made from quality automotive vinyl. This product covers, and protects the tail light while also giving it a completely new look. The top of aggressive tail lights are often sun damaged more than most because there is more surface area for the sun to hit, because of this we have developed the Tail Light Deck Vinyl Overlay.

QUICK INSTALL GUIDE: Getting the vinyl installed on your ride is very easy and only requires a squeegee. We recommend the Pro Felt Squeegee, and a sharp blade for this install. First clean the surface of the tail light, position the overlay on the tail light. Use a squeegee to push out and remove any excess air bubbles from underneath the vinyl. This entire process should take you about 20-30 minutes to complete.

FULL INSTALLATION GUIDE: After cleaning the surface of the tail light, make sure you do not have any debris on the surface as it will show in the product. To install, start with piece A of the overlay. Align Corner 1 of the overlay to the corner of the taillight that points to the front of the vehicle, while also aligning inner Corner 2. Once positioned, use your finger to push the vinyl down, straight across from Corner 1 to Corner 2 creating a CENTER line. Apply pressure to lay the material in a single line, thus hinging the vinyl so that the center of the overlay is now applied to the taillight, and the top and bottom of the overlay are freely moving not installed. Take corner 3 and align it to corresponding corner without laying the material. Starting from the CENTER, use a squeegee or your finger to push the air outwards to corner 3. While laying the material into place pay attention to the outer lines of the tail light and make sure they are matching up with the overlay. If they are excessively off you may need to pull the material back up and reposition. Be careful not to warp or stretch the material in the process. If the positioning is slightly off, some trimming may be required as excess vinyl may fall differently than originally intended, in most cases the excess will be minimal enough to simply tuck it around the edge of the tail light. Once all the air is pushed out, move back to the center and push the air outwards to corner 4. After all the air has been pushed out of piece A, you can move onto the last two pieces, B and C which are simply lined up on the corresponding areas of the tail light and layed into place the same way as Piece A. An extra Piece B and C are included for both driver and passenger sides incase a second attempt is needed.

This install is a 3 out 5 in Difficulty.

Difficulty Rating of 1 is used for overlays that are easy for everyone including first time DIYers. (PIECE OF CAKE)

Difficulty Rating of 2 is used when you should expect installations that are easy, but have a few spots that you'll need to take extra care. (NOT TO HARD AT ALL REALLY)

• Includes driver and passenger side overlays (total pieces included is 10)
  
• Adhesive backed film for easy installation and removal.
• Reduces appearance of existing cracks and scratches.
• Maintenance free & car wash safe.
• Can be removed without any damage to lights.
• 5-7 year outdoor life expectancy.

Excited about your finished Product, let us know below! Take a picture while your at it, and let us know on instagram! @premiumautostyling /// Interested in a custom color or finish for this product. Contact our team at [email protected] and we can look into your request before you place your order.