CONVENIENT TO USE: The aluminum cored wire can be used directly without the need for other flux powders.

EXCELLENT WELDING EFFECT: The aluminum cored wire has excellent welding performance when used, and the welding effect is full and smooth.

GOOD HARDNESS AND TOUGHNESS:The aluminum cored wire has a low melting point, good hardness and toughness, and has good sealing properties at the position after welding.

FEATURES: The welding residue of this aluminum cored welding wire is non-corrosive, non-hygroscopic and firmly attached.

Welding:
Step 1 use sandpaper to polish brass and aluminum tube welding parts (must to clean metal surface's paint, oxide, oil, etc).
Step 2 moving the gun to be heated evenly welding parts, and then continue to use the electrode to be welded
Step 3 when the temperature rises to 360 degrees, the copper and aluminum welding rod to melt and evenly into the joint, Remove the torch after the weld is full, waiting cooling is OK.
Step 4 No further treatment after cooling, flux residue is visible but not corrosive, non-hygroscopic and firmly attached.

Suitable for:
1. Transformers and reactors aluminum and copper joints copper and aluminum foil's welding
2. Refrigerator and air conditioning's condenser / evaporator's aluminum pipe and brass's welding
3. Radiators, motors, batteries, household appliances and other products copper and aluminum wire's welding.

Specifications

Package Includes

• 1 x Welding Rod (5m)

Package Includes