3 color 1 Station  Ribbon Screen Printing Press with Dryer

1.The  machine is designed for stand up operation, and the user can operate on  the seat. The platform plate is 56 cm away from the ground, and the  machine is equipped with an adjustment foot, the operator can increase  the height of the machine within 18 cm according to needs (the height of  the printing table can be adjusted from 56 to 74 cm).

2.Pallet  size is 40*50 cm, and it is suitable for screen frame inner size 35 cm  wide, 50 cm long; Printing size is 30 cm wide and 44 cm long (within 44  cm of ribbon length at a time).

3.To  guarantee the accuracy of the printing, the machine is equipped with  five different width installation mold:
1.5 cm ribbon user can print 14 pieces at a time (the length of the  ribbon should less than 44 cm) 2 cm ribbon user can print 11 pieces at a  time
2.5 cm ribbon user can print 9 pieces at a time
3 cm ribbon user can print 8 pieces at a time
4 cm ribbon user can print 6 pieces at a time

4.Ribbon  roll up in a roll ,the roller device can place ribbon which the maximum  diameter is 15cm (the diameter of the 100-meter long roll ribbon is  15cm).

5.The  roller device is equipped with clamping pin and anti-slewing ratchet  device, which can effectively control the positioning and reversing of  the winding wheel, so that the ribbon can be take back accurately .

6.This  machine is three-color printing, and equipped with carbon fiber  far-infrared dryer, each color printing chuck can be adjusted up and  down, left and right,forward and back ; It is simple, convenient and  accurate to print.

7.Dryer  can be installed directly on the host disk,and it is equipped with far  infrared probe (attach the dryer operation instruction) and the locating  slot, after printing a color, rotate the dryer to the pallet, the  positioning beads stuck positioning groove is fixed above the pallet,  far-infrared dryer probe turn on automatically (heating time can be  adjusted), after drying rotary dryer (automatic shutdown) next color  printing, and so on.

8.Requirements  for making plate

Length:the length of the  printed pattern should be within 44 cm

Printing width: Each space  between two ribbons is 4mm,the center space of the two adjacent ribbons  is:
1.5cm ribbon：19mm
2cm ribbon：24mm
2.5cm ribbon：29mm
3cm ribbon：34mm
4cm ribbon：44mm

1*3 color 1 Station Ribbon Screen Printing  Press with Dryer