For light to medium duty

FEATURES:

• Designed for sandblasting of various surfaces
• Remove most coatings down to white metal, grafitti clean up, and paint surface preparation
• Experiment with the various pressures on your machine and the grade of sand to determine which will give the best results

Specifcations:

• 8 GPM maximum
• 3650 PSI maximum
• 190°F. maximum
• 24" wand
• 25 feet of polybraid hose

Kit includes:

• Carbide nozzle
• 25’ 1/2” polybraid hose
• 18” wand pipe with qc plug
• Sand probe

INSTALLATION:

1. Install male pipe thread into the outlet of trigger gun. If using teflon tape as a sealant, make sure to get no tape inside the pipe, as it may clog the high pressure water nozzle
2. Insert the probe into bag, bucket, or pile of sand. MAKE CERTAIN THE OPPOSITE END OF THE SHORTER TUBE IS NOT COVERED BY SAND. This is a breather tube and performance will be affected dramatically if this tube is obstructed
3. Turn adjustment knob fully clockwise for maximum sand flow