Nitrous oxide cartridges for CryoPen®

CryoPen B+: 23.5 g cartridges
CryoPen X+: 8g and 16g cartridges
CryoPen XP: 8g and 16g cartridges
CryoPen O: 8g and 16g cartridges

Use of the instrument:
Step 1 : Loading a new cartridge
Cartridges are packaged in peel-apart blister packs with an assembled filter/perforator. The filters are used for the protection of the applicator, the perforator to pierce the cartridge.
CryoPen Check the cavity for any remaining items.
Open the peel-off packaging. Take out the filter/perforator with the tweezers. Hold the tip of the CryoPen pointing downward. Place the filter/perforator into the instrument making sure it is flat at the bottom of the loading cavity.
The perforator trocar must point upwards! Take the cartridge and insert it into the cavity, narrow side down, above the filter/perforator.
SEE IMAGE 1

Step 2: Puncture the unused cartridge
Carefully screw the posterior end of the CryoPen onto the anterior end.
Proceed until you feel that contact is established between the filter/perforator block and the cartridge. Then position your hands so as to perform a final rotation movement without interruption. Then turn quickly until you reach the stop.
You may hear a brief hissing sound.
The briefer it is, the better!

Extracting the used cartridge and emptying the cavity
Before loading a new cartridge, first release all residual gas from the cartridge by unscrewing the applicator and then pressing the trigger. Then unscrew the rear end. Discard the used cartridge and filter/perforator.
Concerning the CryoPen X+ and CryoPen XP instruments, be careful not to throw away the 16/8 g converter.
Make sure that the filter/perforator used does not remain in the cavity. The cavity should no longer contain any element.

Step 3: Using your CryoPen
Remove the applicator cap. Gently press the trigger to start the flow of N?O. Release the trigger to stop the flow of cryogenic liquid.
1 or 2 seconds after releasing the trigger, the gas remaining in the applicator is released.
One cartridge can be used for multiple treatments and patients.

Important notes:

• Be sure to only use cartridges and filters/perforators supplied by H&O Equipments nv/sa. Any other cartridge and filter/perforator will damage the instrument.
• Incorrect positioning of the filter/perforator device in the loading cavity will cause irreversible damage to the instrument.
• Residual foreign matter present in the loading cavity when inserting a new filter/perforator may cause instrument failure.
• The loaded instrument is under high pressure. Any modification to the structure of the instrument may result in a potential risk.
• Never obstruct the gas expulsion opening with your hand, at the end of the rear part, when removing the cartridge!
• The cartridges must be kept away from heat (max 50°C/122°F). Leave the applicator cap on when not in use.
• CryoPen instruments are reserved exclusively for professional use.
• N2 O cartridges contain both a liquid phase and a gas phase in equilibrium. The proportion of each of these phases depends on the ambient temperature and influences the flow rate at the outlet. Best performance is achieved when the cartridge temperature is between 19°C and 22°C. Lower or higher temperatures will give different values ​​of pressure and density of the cryogenic substance. Above 25°C, the quantity of liquefied N2 O in the CryoPen jet will decrease.
• Empty cartridges should be thrown away with metal waste.

The user manual is available in the "attachments" tab above??