Stainless Steel Carbonation and Line Cleaning Cap

Carbonation Cap

• This carbonation cap is a screw-on cap with an integrated Cornelius ball lock fitting.
• The design is in place to fit most soft drink PET bottles.
• The carbonation cap is a highly effective method to add and maintain carbonation in beverages for extended periods of time.
• Made from 304 stainless steel, this carbonation cap will last years of use with virtually no maintenance.

Method to carbonate.

1. Fill beer from your tap, or if you have an Intertap Growler Filler tap or beer gun with a CO2 purge option, use that to purge 3 seconds worth of gas into the bottle (e.g. 1.25L Coke Bottle) to 3cm from the top. Beer will last considerable longer with a purge.

2. With one hand ready to screw the cap on, with your other hand squeeze the bottle until liquid is right on the brim. Then screw the cap on to make a seal

3. Attach gas ball lock and add CO2 to the bottle to punch out the 3cm at the top of the bottle with CO2.

4. If you only finished half the bottle, squeeze out as much air as possible and fill with CO2.

Line Cleaning Cap

• Need to clean your beer line?
• Carbonate your unfizzy beer quickly?or simply want to take a traveller over to a mates?
• Then do yourself a favour and grab one of these essential tools for your brewing needs.

Method to clean lines

• 1. Acquire empty plastic PET bottle (e.g. 1.25 Litre Coke Bottle)
• 2. Add cleaning solution for a 1 Litre mixture
• 3. Add warm water to 1 Litre
• 4. Attach Cleaning Cap to bottle
• 5. Attach Liquid ball lock disconnect connected to your tap to cap.
• 6. Turn on Tap with a jug or bucket underneath it to catch the beer/cleaning solution
• 7. Turn bottle upside down and squeeze, (you can pressurise the bottle if you want so you don't have to squeeze, but this is just as fast and easy)
• 8. Wait until liquid out of tap runs clear, we recommend to wait 5 minutes with solution in the lines
• 9. Repeat 7-8 on other taps
• 10. Empty Bottle and fill with same temperature water, flush lines until you're satisfied there's no more cleaning solution left in the lines.
• 11. Hook up your beer line and pour away.

Specifications

• Made out of Stainless Steel
• Liquid and Gas ball lock compatible.
• Barbed fitting fits 4mm, 5mm & 6mm ID hose
• For use with P.E.T Screw Top Bottles