The 8010-101-200 is a 24VAC diaphragm beverage pump rated at 2.0 GPM and 80 PSI, an OEM-spec replacement pump for commercial beverage and water dispensing equipment that runs on 24VAC control voltage. Commonly found in soda fountain equipment, water booster systems, and post-mix dispensers where the low-voltage AC control circuit drives the pump directly.

Why 24VAC Over 115VAC

24VAC is the standard control voltage in most commercial beverage equipment built since the 1990s. Lower voltage means safer service work, smaller wire gauges, and simpler control circuits compared to running everything off line voltage. If your existing pump is 24VAC, the replacement must match - 115V pumps won't drop in.

Service Notes

Confirm voltage, GPM, and PSI specs match your existing pump before swapping. The 8010-101-200 part number is used across multiple OEM applications; if your service manual references this number, this is the right replacement. For unknown pumps, check the nameplate for voltage and flow specs, then match.

Install

Standard barbed fittings on inlet and outlet. Wire to 24VAC control via the equipment's existing pump relay. Pairs with standard beverage system filters and accumulator tanks.