Interface Converter NMEA 2000-NMEA 0183

Bridge the gap between legacy and modern marine electronics effortlessly with a reliable interface designed for seamless data translation. This compact converter handles bidirectional communication, ensuring your boat's systems talk the same language whether you're upgrading gear or mixing equipment from different eras. Perfect for sailors, anglers, and offshore adventurers who demand precision without the hassle of mismatched protocols.

Why Boat Owners Choose This Converter

In the demanding world of marine navigation, compatibility issues can disrupt your voyage. This device solves that by translating data between older serial standards and today's networked setups, keeping critical info like position, speed, and heading flowing smoothly across your dashboard.

• Rugged Marine Protection: Built to withstand spray and splashes with an IP55 waterproof rating, it thrives in rough seas and humid cockpits.
• Proven Durability: Engineered for extreme conditions, from pounding waves to salty air, delivering unflinching performance mile after mile.
• Effortless Setup: Plug-and-play design minimizes wiring headaches, getting you back on the water faster.
• Compact and Versatile: Small footprint fits anywhere, powering up on standard 12-volt systems without fuss.

Smart Modes for Every Scenario

Tailor data speed to your needs with three intelligent operating modes:

• Standard Mode: Handles everyday conversions between serial and network formats for GPS, depth sounders, and instruments.
• High-Speed Mode: Accelerates heading and sensor data for autopilot systems, ensuring responsive steering even in tight maneuvers or autopilot reliance.
• AIS Mode: Optimized for Automatic Identification System traffic, prioritizing collision avoidance data without lag.

Switch modes as conditions change—from casual cruising to high-stakes racing—maximizing efficiency and reducing network clutter.

Real-World Applications on the Water

Imagine integrating that trusty old chartplotter with a new multifunction display, or linking legacy radar to a CAN-based network. This converter shines in mixed fleets:

Whether retrofitting a classic vessel or expanding a cutting-edge setup, it supports smooth data sharing for safer, smarter boating. Users report fewer dropouts and crisper autopilot responses after installation.

Quick Installation Guide

Getting started is straightforward:

1. Power off all devices and disconnect batteries.
2. Mount in a dry, accessible spot using included hardware.
3. Connect NMEA0183 wires to serial ports (RX/TX/GND).
4. Link NMEA2000 drop cable to your backbone.
5. Supply 12V DC power and select your mode via switches.
6. Test data flow on displays—watch headings update in real-time.

Pro tip: Use terminators on network ends and keep cable runs under 6 meters for best results. Always double-check polarity to avoid gremlins.

Frequently Asked Questions

What formats does this converter support?

It translates bidirectionally between NMEA0183 serial data and NMEA2000/CAN bus networks, covering common marine sentences like GGA, RMC, HDG, and more.

Is it suitable for autopilot integration?

Yes, the high-speed mode boosts sensor data transmission, ideal for responsive autopilot control in dynamic conditions.

How waterproof is the unit?

Rated IP55, it resists water jets and dust, making it reliable for exposed deck mounts or engine room use.

What power does it require?

Operates on 12-volt DC systems common in boats, drawing minimal current for efficient runtime.

Can it handle AIS data specifically?

Absolutely—the dedicated AIS mode ensures fast, prioritized handling of target tracks and safety messages.

Does it support multiple devices?

It facilitates network sharing, allowing one converter to feed data to multiple NMEA2000 displays or vice versa.

What's the best mode for general cruising?

Standard mode works great for routine nav data like position and depth across mixed systems.

For over 70 years, Furuno has been continuously imagining and creating new solutions, making new marine electronic equipment with the goal of offering both performance and simplicity for everyone. Not only for men and women who make a living on the seas, but also for those who simply want to enjoy the boating lifestyle. For them, Furuno has become synonymous with quality, performance, and reliability.

Furuno IFNMEA2K2 Attributes

• Used To: Convert CAN Bus Format Data To NMEA0183 Format Data And NMEA0183 Format Data To CAN Bus Format Data
• Voltage: 12 Volt

Furuno IFNMEA2K2 Features & Benefits

• IP55 Rating Waterproof
• High-Performance Products Proven In The Harshest Of Environments
• Offering Quality Design
• Easy To Install
• Limited 2 Year Warranty

IF-NMEA2K2

The IF-NMEA2K2 is an interface to convert data from NMEA0183 format to NMEA2000 / CAN bus format and vice versa. In addition to the normal conversion mode, the High Speed mode to convert sensor data for Autopilot as well as an AIS mode dedicated to AIS data are available in one compact unit. With these three modes, you can optimize the conversion speed depending on the situational requirements.

This product may not be returned to the original point of purchase. Please contact the manufacturer directly with any issues or concerns.

In addition to the regular conversion mode, the high-speed mode (used to convert sensor data for the autopilot) and the AIS mode dedicated to AIS data can also be used in a compact model.
SKU: NVN-47434
MPN: IF-NMEA2K2
UPC: 611679345332