Rear camber change: +/-1.25 degrees C class (W205/C204), E class (W212) Not compatible with AMG Rear left and right set Japanese installation manual included

Product introduction: Adds an adjustment mechanism to the rear camber of the Mercedes-Benz W212/E class. (Rear left and right set) Camber can be adjusted up to ±1.25° by replacing the outer bushes of the two rear upper arms (camber arm and radius arm). By using the 72509 press set and 76000 bushing adapter, work can be done without removing the arm from the vehicle. *When replacing the bush, please use 76000 to avoid damaging the arm. Failure to use an appropriate adapter may damage the arm and prevent the bush from being attached. Camber change amount: ±1.25° Reference Compatible Vehicles Mercedes (AMG not compatible): 28855: C Class (W205/C204), E Class (W212) Please be sure to check the latest compatibility table. http://www.amtecs.co.jp/products/spc_table.html Recommended tools: 72509 ball joint press + 76000 bush press adapter Precautions for use We cannot provide any support or answers regarding vehicle inspections. Please check with the relevant testing laboratory. Before starting work, be sure to check that it is compatible with the vehicle model, that there are no missing parts, and that the bushing size to be replaced is appropriate. Please also check the car manufacturer's maintenance manual. This part must be installed at your own risk by someone with the necessary knowledge and skills, using appropriate and safe tools and equipment. Improper installation may result in loss of vehicle control, personal injury, and vehicle damage. We are not responsible for any injuries, accidents, or malfunctions that may occur during the installation or use of this product. After installation, 4 wheel alignment/toe adjustment is required. Safety Warning We cannot provide any assistance or answers regarding vehicle inspections. Please check with the relevant testing laboratory. Before starting work, be sure to check that it is compatible with the vehicle model, that there are no missing parts, and that the bushing size to be replaced is appropriate. Please also check the car manufacturer's maintenance manual. This part must be installed at your own risk by someone with the necessary knowledge and skills, using appropriate and safe tools and equipment. Improper installation may result in loss of vehicle control, personal injury, and vehicle damage. We are not responsible for any injuries, accidents, or malfunctions that may occur during the installation or use of this product. After installation, 4 wheel alignment/toe adjustment is required. Read more


Manufacturer: ‎Specialty Products Company
Brand: ‎Specialty Products Company
Model name: ‎28855
Packing size: ‎19.7 x 17.4 x 6.7 cm; 903.99 g
Product model number: ‎28855
Original product number: ‎28855
Certification: ‎None
Product weight: ‎904 g