Built-in Axicube Shift Angle Finder 

One of the abrasive holder stops is equipped with the Axicube Shift electronic angle finder (an updated version of Axicube-i) featuring a special rail mounting.

You can work either with the angle finder installed — securely fixed to the holder using magnets and a fastening screw — or without it, reducing the load on the stone during sharpening. The fixing screw can be installed on either left or right side.

Axicube Shift shows the current sharpening angle with an accuracy of 0.1° and helpts helps to control the sharpening angle in real time and track angle changes, for example, when changing the abrasive.

The bright display makes it easy to understand the readings in any light. The angle finder has a durable aircraft aluminum housing and is resistant to vibrations.

The Axicube Shift has a removable Li-pol battery and charges via a USB - USB Type-C connector. When the battery is low, the device displays “Lo.” upon startup. Charging takes 15–20 minutes at up to 0.5 A and 5 V.

Compatibility

This angle finder is compatible only with TSPROF K03, K4, and other sharpening systems where the sharpening angle is set by tilting the abrasive stone relative to a fixed base.

Since the Axicube Shift angle finder is calibrated against a stationary plane, it is *not compatible with TSPROF Kadet, Blitz, and other sharpeners where the angle is set by tilting the blade relative to a moving abrasive holder.

*To buy Axicube Shift compatible with TSPROF Pioneer, look for TSPROF Axicube Shift Abrasive Holder, 6 mm.

Important

⚠ Attention! Charge the angle gauge upon receipt. Do not allow the battery to fully self-discharge. For uninterrupted operation, monthly charging is required. Store the angle gauge at temperatures not exceeding +27°C.

Axicube Shift Specifications

Set Includes

• Axicube Shift Angle Finder – 1 pc.
  
• Stationary abrasive stop with rail mounting – 1 pc.
• Movable abrasive stop – 1 pc.
  
• Axicube Calibration Prism – 1 pc.
• USB Type-C cable – 1 pc.