20% OFF shipping at neumaticosmexico.com on orders over $79 + up to 10% OFF products

Ship to:

/ English / USD

New Arrival

Air Freeshipping Best Sellers Nihao Choice

Sourcing

Shipping Calculation

home > S3M Timing Belt 87–4500mm Closed Loop Rubber Drive Belt Pitch 3mm Width 20mm > S3M Timing Belt 87–4500mm Closed Loop Rubber Drive Belt Pitch 3mm Width 20mm

S3M Timing Belt 87–4500mm Closed Loop Rubber Drive Belt Pitch 3mm Width 20mm main image 0

S3M Timing Belt 87–4500mm Closed Loop Rubber Drive Belt Pitch 3mm Width 20mm main image 1

download picture

description

Report this seller or product

S3M Timing Belt 87–4500mm Closed Loop Rubber Drive Belt Pitch 3mm Width 20mmS3M Timing Belt Closed Loop Rubber Drive Belt for Precise Motion Control When a worn or incorrectly sized drive belt causes skipped steps, misaligned prints, or erratic conveyor movement, the entire machine suffers. Engineers, makers, and repair technicians who rely on repeatable, slip free power transmission need an S3M timing belt that fits their exact setup not a generic approximation. This listing offers a wide selection of closed loop S3M rubber

Shopping security

Each payment you make on thelockerguy is secured with strict SSL encryption and PCI DSS data protection protocols

product description

Why choose thelockerguy wholesale?

S3M Timing Belt — Closed Loop Rubber Drive Belt for Precise Motion Control

When a worn or incorrectly sized drive belt causes skipped steps, misaligned prints, or erratic conveyor movement, the entire machine suffers. Engineers, makers, and repair technicians who rely on repeatable, slip-free power transmission need an S3M timing belt that fits their exact setup — not a generic approximation. This listing offers a wide selection of closed-loop S3M rubber timing belts engineered to the 3mm pitch standard, so you can match your existing pulleys without guesswork.

Each belt is sold individually (1 piece per order) and is constructed from rubber with an internal tension cord for dimensional stability, typically finished with a nylon tooth facing for reduced wear. The belt pitch is 3mm (S3M standard), width is 20mm, and perimeter options range from 87mm (≈3.4") to 4500mm (≈177.2"), covering 151 size variants. Tooth count varies by perimeter — each variant listing shows the exact count (e.g., 300mm = 100 teeth).

These S3M closed loop rubber drive belts are widely used in 3D printer X/Y axis drives, desktop CNC router feed systems, small conveyor belt assemblies, and light-duty robotic actuators. The standardized S3M tooth profile ensures drop-in compatibility with any S3M pulley or sprocket, making them a reliable replacement part or upgrade component for motion control systems.

🔗 Compatibility: Fits all standard S3M-profile pulleys and sprockets with a 3mm pitch. Belt width is 20mm — confirm your pulley groove accommodates 20mm width before ordering.

⚠️ Size Note: Perimeter = belt outer loop length. Select your size by matching the perimeter (mm) to your machine's belt path. Tooth count is listed in the variant options for reference.

✅ Key Features of These S3M Timing Belts

📐3mm S3M Pitch Standard — Trapezoidal tooth profile matches all S3M pulleys exactly, ensuring zero-slip synchronous drive in 3D printers and CNC motion systems.
🔄Closed Loop Construction — Seamless closed-loop design eliminates splice weak points, delivering consistent tension and smooth rotation throughout the belt's service life.
🧱Rubber Body with Tension Cord — Rubber compound provides flexibility and grip; the internal cord (typically fiberglass or steel) resists elongation under load for dimensional accuracy.
📏151 Size Options (87–4500mm) — From compact 87mm (≈3.4") loops for desktop machines to 4500mm (≈177.2") runs for conveyor systems — one listing covers your entire replacement belt range.
⚙️20mm Consistent Belt Width — Uniform 20mm width across all sizes simplifies pulley selection and ensures lateral tracking stability in light-duty robotic and automation drives.
🔁Direct Replacement Fit — Designed as a drop-in replacement for worn S3M rubber drive belts in 3D printers, small CNC routers, and conveyor belt assemblies without modification.

📐 Technical Specifications — S3M Closed Loop Rubber Timing Belt

Belt Type	S3M Synchronous Timing Belt (Closed Loop)
Tooth Profile	Trapezoidal (S3M standard)
Pitch	3mm
Belt Width	20mm (≈0.79")
Perimeter Range	87mm (≈3.4") – 4500mm (≈177.2")
Tooth Count Range	29 teeth (87mm) – 1500 teeth (4500mm)
Body Material	Rubber
Tension Member	Typically fiberglass or steel cord — Contact us to confirm
Tooth Facing	Typically nylon fabric — Contact us to confirm
Quantity per Order	1 piece
Compatible Pulleys	All S3M-profile pulleys / sprockets
Typical Applications	3D printers, CNC routers, conveyors, robotics
Operating Environment	Dry, enclosed environments recommended
Country of Origin	See variant options

❓ Frequently Asked Questions

How do I choose the right S3M timing belt length?

Measure the center-to-center distance between your two pulleys, then use the formula: Belt Perimeter ≈ 2 × C + π × (D1 + D2) / 2, where D1 and D2 are the pulley pitch diameters. For example, a 300mm perimeter belt is approximately 11.8". Always round up to the nearest available size and verify with your machine's manual. This listing covers 87mm (≈3.4") to 4500mm (≈177.2").

What load can an S3M rubber timing belt handle?

S3M belts are generally rated for light-to-medium duty power transmission. The 3mm pitch design is typically suited for loads up to a few hundred Newtons of tension, depending on the number of teeth in mesh and operating speed. For heavy industrial loads, consider wider belts or higher-pitch alternatives. Contact us to confirm suitability for your specific application.

Can this timing belt be used outdoors or in wet environments?

Standard rubber timing belts are generally not recommended for prolonged outdoor UV exposure or continuous immersion in water or oils. In most cases, they perform well in enclosed, dry environments such as 3D printer enclosures or indoor CNC cabinets. If your application involves moisture or chemicals, contact us to discuss alternative materials.

Is this belt compatible with standard S3M pulleys?

Yes. This belt follows the S3M (Synchronous 3mm pitch) standard and is compatible with any S3M-profile pulley or sprocket. The 20mm belt width requires a pulley groove width of at least 20mm. Always verify the pulley's tooth profile matches S3M before ordering to ensure proper mesh and avoid premature wear.

What is the difference between S3M and GT2 or HTD timing belt profiles?

S3M uses a trapezoidal tooth profile with a 3mm pitch, while GT2 and HTD use curvilinear profiles. S3M belts are typically used in light-duty motion control, 3D printers, and small CNC machines where the existing pulleys are designed for the S3M standard. GT2 and HTD profiles generally offer lower backlash and higher torque capacity. Choose S3M when your machine specifies it.

How do I verify the number of teeth for my required belt size?

For S3M belts, the tooth count equals the belt perimeter divided by the pitch: Teeth = Perimeter (mm) ÷ 3. For example, a 300mm belt has 100 teeth. Each variant on this listing displays both the perimeter and tooth count in the options dropdown, so you can confirm before adding to cart.

What materials are used in this S3M timing belt?

These S3M timing belts are made from a rubber compound body with an internal tension cord — typically fiberglass or steel — for dimensional stability under load. The tooth surface is generally reinforced with a nylon facing to reduce wear during meshing. Contact us to confirm the exact material specification for your order.

🛒 Select your belt type and perimeter above, then add to cart — ships from our US warehouse.

S3M Timing Belt 87–4500mm Closed Loop Rubber Drive Belt Pitch 3mm Width 20mm

Name: S3M Timing Belt 87–4500mm Closed Loop Rubber Drive Belt Pitch 3mm Width 20mm
Brand: neumaticosmexico.com
SKU: 77030828133
Price: 24.00 USD
Availability: InStock
Rating: 4.3924 (2396 reviews)