Machine info from PDF:
Model Aquamaster CB-1200E
Conveyor tunnel capacity 12.5" W x 6" H
Load/unload height 35.00" (nominal)
Canopy Full-Access, lift-off, 1/8" fiberglass composite, half of machine, 1 segment
Wash
Spray zone length 18"
Tank capacity 108 gallons
Tank construction 12 gauge, Type 304 stainless steel
Pump brand Gusher
Pump type Horizontal, stainless steel, SC 1.0x1.25x5EH-CC-4-B
Pump GPM/pressure 25 GPM @ 15 PSI
Pump HP/RPM 0.75 HP/ 3,600 RPM
Pump serial number WT41-248
Nozzle type/quantity Bex, 1" K-ball: (7) upper, Bex 6530 (6) lower, Bex 8030
Overflow 1.5" NPT (male)
Drain 2" NPT (male)
Fill inlet 1/2" NPT (female)
Fill solenoid 1/2" Granzow
Level control Stainless Steel, 3-position float-type
Solution heat/capacity Electric, 36 kW (2 @ 18 kW), Watlow Firebar immersion heaters
Blowoff (Ambient)
Blowoff length 12"
Blowoff construction 12 gauge, Type 304 stainless steel
Blower brand/type Cincinnati Fan / aluminum, #PB-14A
Blower HP/RPM 2 HP / 3,500 RPM
Blower capacity 460 CFM @ 16" SP
Blower serial number 1500431
High velocity air knives, qty. (1) upper (dual slots), (1) lower
Conveyor
Drive type D.C.
Belt type 12" / 0.5" x 0.5", flat wire, stainless steel
Conveyor rollers 1.90" O.D., stainless steel
Drive brand/model Leeson, gearmotor
Model number M1760021.00
Drive HP/speed range 1/8 HP / 1-6 FPM
Controls
Motor starters/type Allen-Bradley, IEC
Temperature controls Omron, digital
Switches Allen-Bradley
Voltage 480V / 3PH / 60HZ
Amp draw 51.8 FLA
Disconnect size/type 60A fused at 60A
Accessories
Exhaust fan system Hartzel 12", 2 HP, 1,800 CFM @ 2" SP
Brand Cincinnati, LM-6 920 CFM @ 1" SP
Mist collector
Brand/type Losma, Darwin 1200M
Motor HP/RPM 2 HP / 3,400 RPM
Rating 730 CFM
Micro filtration (wash) Pump discharge, single, stainless steel, 4"x12"
Filter bags 100 micron
Oil skimmer 1" belt-type, stainless steel
Brand/model number Wayne, Mini Skimmer
Solution heat auto-timer Programmable 7-day timer
Product sensor – load Photo-eye, adjustable timer, controls
pumps/blowoff
OK to load interface relay Tied to load end photo eye; allows the user to
interface automation