Aspire Tigon Starter Kit Overview

Aspire continues to conquer the market in versatility with the remarkable Aspire Tigon Starter Kit with two distinct coil heads for mouth to lung or direct lung use. This sleek pen-style device has compact dimensions of 142mm x 24.5mm with high quality ingenuity from top to bottom. The Aspire Tigon Mod has Zinc Alloy construction and a built-in 2600mAh rechargeable battery with a 3.3-4.2V output. A battery life indicator along the chassis shines red when battery life is 3.5V or less, blue at 3.5-3.8V, and pink at 3.8V or above. When the battery is fully charged the indicator light will flash twenty times then turn off to conserve battery life. Simply use the industry standard Micro-USB port on the backside of the mod to charge the long-lasting 2600mAh integrated battery. For your convenience, the Aspire Tigon Starter Kit has a 2A charging current so you can charge up your device in no time. This device has a simplistic design with a single firing button operation that is clicked five times in order to turn the device on or off. Operating in Bypass mode, the Aspire Tigon battery provides a ten second continuous firing time before shutting off for safety purposes. Safety features other than automatic cut-off include short circuit protection, low voltage protection, overcharge protection, and over heat protection.

Attached to the Aspire Tigon 2600mAh battery pack by a threaded 510 connection is the dual purpose Aspire Tigon Sub-Ohm and MTL Tank. This tank is crafted with superior Stainless Steel and durable Quartz glass while including two uniquely curved 510 Delrin drip tips. The longer, ball point drip tip is meant to enhance mouth to lung draws while the shorter drip tip has a wider bore deigned to enhance direct lung vaping. This tank has a large 3.5mL e-liquid capacity and can be filled with both standard and nicotine salt infused e-juices. To conveniently top fill your tank pull up on the top cap and then slide it open as indicated by a small Aspire logo. This childproof system will expose the fill port with a Silicone seal that provides for further leak-resistance. Inside the tank is a pre-installed 0.4 ohm BVC coil rated at 23-28W for direct lung draws from standard e-liquids. Included with this kit is a 1.2 ohm BVC coil rated at lower wattages of 10-12W for MTL draws with nicotine salt infused vape juices. These coils are press fitted and pushed up through the bottom of the inner chamber after the base of the tank has been removed. This tank has a truly unique internal design that consists of spring-loaded sleeves that go over the wicking ports of the inner chamber to keep e-liquid inside the tank even when you’re switching coils. The base of this tank has one-sided airflow that can alternate between five small holes for MTL use or a slot style hole for direct lung use.