These Performance Machine Contour CNC machined billet aluminum sets include 9/16" brake master cylinder, brake light switch, starter interrupt switch, left and right switch housings, dual cable snap in throttle housing, clutch side spacer and your choice of either a cable clutch perch or a 11/16" hydraulic clutch master cylinder for use with a PM hydraulic clutch slave cover. The PM switch housings with integrated rocker buttons marked clearly with function symbols utilize the factory H-D electronic control modules. Note: Does not work with Screamin' Eagle or CVO hydraulic clutch

Note: The new DOT 4 (as used in the late models Harley-Davidson) can be mixed with the old DOT 4 without any problem, even with the older DOT 3. The new DOT 4 CAN NOT BE MIXED WITH DOT 5. DOT 5 is a Silicon based fluid that has its own formula. This also means that DOT 4 can not be used in a system that has been on DOT 5 (and vice versa) unless the whole system has been taken apart and cleaned. It also needs new seals and cups before the DOT 4 can be used. Cleaning the parts with cloth or paper is also no option, the parts have to be very well cleaned with brake cleaner! (ZPN748043 or similar).