The Wilkins 12-ZW1070XLCPVC is an Aqua-Gard® thermostatic mixing valve designed for point-of-use scald protection with 1/2" CPVC connections for residential and commercial applications.

Key Specifications:

• Size: 1/2 Inches
• Maximum Working Pressure: 125 psi
• Outlet Temperature Range: 95-115°F max
• Notable Certifications: ASSE 1070, cUPC, CSA B125.70
• Connection Type: 1/2" CPVC

Other Related Variants:

• 12-ZW1070XL: 1/2" FNPT version
• 12-ZW1070XLC: 1/2" CU Sweat version
• 12-ZW1070XLPEX: 1/2" Barb version
• 12-ZW1070XLPEXF1960: 1/2" Barb version
• 12-ZW1070XLPF: 1/2" push fit version
• 1-ZW1070XLC: 1" CU Sweat version
• 34-ZW1070XL: 3/4" FNPT version
• 34-ZW1070XLC: 3/4" CU Sweat version
• 38-ZW1070XLCOMP: 3/8" Compression version

Materials:

• Body: Low Lead Cast Bronze, ASTM B 584 with Chrome Plating ASTM B 456
• Internal Brass: Low Lead Brass, ASTM B 927, UNS C27450
• Piston: Polysulfone
• Guide Tube: Noryl GFN2
• Spring & Screen: 300 Series Stainless Steel
• Seals: Viton
• Checks: Noryl GFN2

Typical Installation:

The Zurn 12-ZW1070XLCPVC is designed to be installed at the point of use for individual outlets and single-use applications including plumbing fixtures, appliances, sinks, lavatories, bathtubs, and sensor faucets where final control of water temperature is required.

Standards Compliance:

ASSE Listed 1070; cUPC Listed; CSA Certified B125.70; NSF/ANSI/CAN 61-9 Q≤1

Features & Benefits:

• Lead-Free Compliance: Meets 0.25% maximum weighted average lead content for safe potable water applications.
• Rapid Scald Protection: Extremely rapid response rate prevents scalding at point-of-use installations with outlet temperature control from 95-115°F.
• High Flow Capacity: Delivers up to 10 GPM flow rate at 45 psi pressure loss with minimum flow of 0.25 GPM for versatile installations.
• Durable Construction: Low lead cast bronze body with chrome plating, stainless steel components, and Viton seals ensure long-lasting performance.

FAQ

Q: What is the maximum pressure differential between hot and cold inlets?

A: The maximum pressure differential is 15 psi between hot and cold inlets for proper operation.

Q: What temperature ranges are required for hot and cold supply water?

A: Hot supply should be 120-195°F maximum and cold supply should be 39-80°F for the Wilkins 12-ZW1070XLCPVC to function properly.

Q: Does the outlet temperature need to be field adjusted?

A: Yes, the temperature must be field set within the 95-115°F outlet temperature range with +/- 3°F accuracy.

"Hydrate Everyone, Everywhere!" BottleFillingStations.com | Contact us