Generally, the shank length (L) should provide at least 1.5× the bolt diameter in thread engagement — for M24, that's typically around 36mm minimum. Available lengths run from 70mm (≈2.76") to 200mm (≈7.87"). Choose a longer shank when passing through thick structural members (beams, posts, concrete) or when you need extra thread projection for a nut and washer on the far side.

Working load limits for M24 eye bolts typically range from 1,000 kg to 2,000 kg (≈2,200–4,400 lbs) for straight in-line axial loads, depending on the specific design and grade. Always apply a safety factor of at least 4:1 and consult a structural engineer for critical overhead lifting. Contact us to confirm the rated load for your specific variant before use.

Yes. 304 stainless steel provides strong resistance to rust, oxidation, and general atmospheric corrosion, making these bolts well-suited for outdoor catenary wire installations, garden structures, pergolas, and covered marine environments. For fully submerged saltwater applications, 316 stainless steel is generally recommended for longer service life.

These use the standard M24 metric coarse thread (M24×3.0 pitch), compatible with any M24 hex nut, threaded insert, or tapped hole following ISO metric specifications. Always verify the thread pitch of your mating component before installation. They are not compatible with UNC/UNF inch-standard threads.

Absolutely — these threaded ring screws are commonly used as anchor points for catenary wire systems, hanging cables, pendant lighting, and suspended signage. The closed-loop eye accepts wire rope clips, carabiners, shackles, and turnbuckles. Ensure the anchor substrate (wood, concrete, or steel) is independently rated for the intended load before installation.

The base width (b) is the inner width of the eye loop and is matched proportionally to the shank length — b=80mm for L 70–110mm shanks, and b=90mm for L 120–200mm shanks. In most cases, simply select the shank length that fits your application and the correct eye size comes with it. If you need a specific eye opening to fit a particular shackle pin or hook, contact us to confirm compatibility before ordering.

Each order includes 1 eye bolt only. Matching M24 hex nuts and flat washers are sold separately. In vibration-prone environments — such as machinery mounts or dynamic rigging — we recommend pairing with a locking nut or applying a thread-locking compound to prevent loosening over time.